Riverstone Networks WICT1-12 Especificações descarregar pdf (Página 79)

Riverstone Networks RS 32000 Switch Router Getting Started Guide 4-13

Initial Configuration Setting Up Passwords

Caution Test all new passwords before saving the active configuration to the Startup

configuration file.

4.5.1 If You Forget Your Passwords

If you forget your passwords follow the procedure below to regain access to your RS 32000.

Note To perform this procedure, you must use a terminal or PC running terminal

emulation software that is connected directly to the RS 32000 through its DB-9

console port.

1. Power cycle the RS 32000.

2. Enter Boot mode by interrupting the normal boot-cycle by pressing the “Esc” key.

3. From the boot prompt enter the set command and note the image name displayed for bootsource.

For example:

4. Enter the following line to reboot the RS 32000:

...

mfg_loop_by = time [time count]

mfg_loop_max = 86400

bootdelay = 2

autoboot = boot

promsetaddrs = 1

netaddr = 134.152.179.132

bootaddr = 0.0.0.0

netmask = 255.255.255.224

gateway = 134.152.179.129

bootsource = /pc-flash/boot/ros80

ethaddr = 00:00:1d:12:34:56

sysid = -1

rs-boot>

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 110 111

Sem comentários

Riverstone Networks WICT1-12 Especificações Página 79