Riverstone Networks WICT1-12 Especificações descarregar pdf (Página 51)

Riverstone Networks RS 32000 Switch Router Getting Started Guide 3-1

3 HARDWARE INSTALLATION

This chapter provides hardware installation instructions and information on safety considerations, environmental

considerations, and regulatory standards.

3.1 SAFETY CONSIDERATIONS

Warning Read the following safety warnings and product cautions to avoid

personal injury or product damage.

3.1.1 Preventing Injury

•

To avoid injury, be careful when lifting the chassis out of the shipping box.

• Never attempt to rack mount the RS 32000 chassis unaided. Ask an assistant to help you hold

the chassis.

• Never operate the RS 32000 with exposed power supply bays or line card slots. You can leave

the PC card slots exposed but make sure you do not insert any objects other than the appropriate

PC flash RAM card into the PC card slot.

• Never operate the RS 32000 if the chassis becomes wet or if the area in which the chassis is

installed is wet.

3.1.2 Preventing Equipment Damage

To prevent accidental product damage, observe the following precautions:

• Always use proper electrostatic discharge (ESD) gear when handling the Control Module,

backplane, line cards or other internal parts of the RS 32000.

• Make sure there are at least 3 inches (7.62 centimeters) of room above and behind the RS 32000

chassis for air flow to the cooling fans.

• Install the RS 32000 as low as possible in the rack to prevent tipping of the rack.

• If the RS 32000 is to be installed in a closed or multi-unit rack, make sure that the ambient

temperature around the unit does not exceed the temperature range listed in Table 3-1.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 110 111

Sem comentários

Riverstone Networks WICT1-12 Especificações Página 51