Riverstone Networks WICT1-12 Especificações descarregar pdf (Página 36)

2-16 Riverstone Networks RS 32000 Switch Router Getting Started Guide

Hardware Overview Introduction

Control Module RJ-45 Connector Pin Assignment

Control Module LEDs

GND (ground) 5 GND (ground)

DTR (data terminal ready) 6 DSR (data set ready)

CTS (clear to send) 7 RTS (request to send)

RTS (request to send) 8 CTS (clear to send)

Unused 9 Unused

Table 2-6 RJ-45 console connector pin assignments

Control Module RJ-45

connector

Pin Number Management console RJ-45

connector

TXD (transmit data) 1 RXD (receive data)

TXD (transmit data) 2 RXD (receive data)

RXD (receive data) 3 TXD (transmit data)

Unused 4 Unused

Unused 5 Unused

RXD (receive data) 6 TXD (transmit data)

Unused 7 Unused

Unused 8 Unused

Table 2-7 Control Module LEDs

LED Description

OK When this LED is on, the RS 32000 and all ports are functioning correctly.

ERR When this LED is on, a fatal system error has occurred. Activate the RS 32000’s boot

PROM to reboot the system.

HBT This LED flashes when the RS 32000’s boot PROM is active.

DIAG When this LED is on, the RS 32000 is in diagnostic mode. While in diagnostic mode,

several other LEDs on the RS 32000 are active, as well.

Table 2-5 DB-9 pin assignments (Continued)

Control Module DB-9

connector (DCE)

Pin number Management console DB-9

connector (DTE)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 110 111

Sem comentários

Riverstone Networks WICT1-12 Especificações Página 36